What does the blocked caller hear when they are blocked?
The blocked caller only hears one ring tone in their phone handset and then silence. After about 10 seconds, they will get a dial tone or busy signal depending on the service.
Single Ring Issue On Blocked Calls
Problem with a single ring If you are having a single ring issue with blocked calls, the CPR Call Blocker uses the ‘first ring’ to get the Caller ID signal and then checks this against the block list to see if the number has been blocked – it is ...
Blocking all calls or dropping after 1 or 2 rings
Problem The call blocker is blocking all incoming calls or they are dropping off after one or 2 rings Reasons for this There is two possible causes of this: Caller ID is not active or not transmitting through to the call blocker There is too much ...
V10000 Most Frequent Questions - February 2019
These are the most frequent questions in February, we have provided different solutions to resolve. Call list or block list button not functioning Solution Options: Ensure line is not overloaded with too much telephony equipment (multiple separate ...
Do CPR Call Blockers repeat caller ID information to the telephones connected to the tel port?
Yes, the Caller ID is captured and repeated to all phones downlinked to the TEL port. If you have a corded phone or cordless phone system base connected there, then all corded phones and cordless handsets to that base will receive the repeated Caller ...
What are the options if the blocked number capacities are reached?
1) You can use two or more Call Blockers in parallel using a duplex jack. Note also, that the CPR Call blocker will work in parallel with other CPR Call Blockers like the V5000 or V10,000 models. Dual Call Blocker