V10000 - How to reset the call blocker

V10000 - How to reset the call blocker

To reset the Call Blocker back to factory settings – this will erase all numbers in the block list and allow list.

First ensure that the call blocker is set up in the standard set up, using the small black cable that was provided.

Solutions:

There is two ways to reset

      1. Press and hold Block List and Allow List together until the words SUCCESSFUL is displayed on the screen of the Call Blocker

      2. Generate a dial tone on the phone the Call blocker is plugged into, then press and hold the block now button until you hear a beep, then enter

*  * 1 # (hear a beep) * 1 # (hear a beep)



    • Related Articles

    • V5000 - How to reset the call blocker

      To reset the Call Blocker back to factory settings – this will erase all numbers in the block list. First ensure that the call blocker is set up in the standard set up, using the small black cable that was provided. Solutions: To reset the Call ...

    • CPR Call Blocker APP for Android

        Adding Contacts to the Blocklist ✎   Upon starting the app your blocklist will be blank by default. There are a variety of ways to add a number to the blocklist,  accessible via the ‘+ ADD‘ button above the  ‘ Blocklist‘ tab icon. You can choose ...

    • ABOUT the CPR Call Blocker Protect+

      This is the CPR Call Blocker Protect + model.  This Call Blocker has been designed by us at CPR specifically for the elderly or very vulnerable. These Call Blockers are designed to BLOCK EVERY call that comes through to a customer's line, unless they ...

    • ABOUT CPR Call Blocker v.202

      This is the CPR Call Blocker v.202 model. This unit is exactly the same as the previous v.201 model apart from the CALL LIST function that accompanies it (on newer v.202 models).  It has a pre-programmed list of 200 numbers altogether, plus you can ...

    • CPR Call Blocker Protect+ Programming Codes

      IMPORTANT - WHEN PROGRAMMING THE CALL BLOCKER PROTECT + YOU WILL ALWAYS HEAR THE BT OPERATOR SAYING YOUR CALL CANNOT BE COMPLETED AS DIALLED. THIS IS NORMAL WITH THE PROTECT + AS THE LINE IS LEFT OPEN FOR MANUAL PROGRAMMING OUR END IF NEEDED. SIMPLY ...