The Call Blocker seems to be blocking all calls, what could be the problem?
This is most likely down to intermittent caller ID caused by a faulty/poor quality ADSL/DSL broadband filter.
Try removing the filter to see if this fixes the issue and replace it if necessary with a top quality ADSL/DSL filter such as NETGEAR, BELKIN, D-LINK or ADSL NATION XF1e branded filters.
This problem can also be down to having too many devices attached to your line, so try disconnecting some equipment to see if it resolves the issue, also.
Related Articles
Blocking all calls or dropping after 1 or 2 rings
Problem The call blocker is blocking all incoming calls or they are dropping off after one or 2 rings Reasons for this There is two possible causes of this: Caller ID is not active or not transmitting through to the call blocker There is too much ...
CPR Call Blocker APP for Android
Adding Contacts to the Blocklist ✎ Upon starting the app your blocklist will be blank by default. There are a variety of ways to add a number to the blocklist, accessible via the ‘+ ADD‘ button above the ‘ Blocklist‘ tab icon. You can choose ...
ABOUT the CPR Call Blocker Protect+
This is the CPR Call Blocker Protect + model. This Call Blocker has been designed by us at CPR specifically for the elderly or very vulnerable. These Call Blockers are designed to BLOCK EVERY call that comes through to a customer's line, unless they ...
Does the call blocker block incoming calls made from VOIP or cell phones?
Yes. The Call Blocker can block any number originating from anywhere. Some phone companies don't block calls from cell phones, but the Call Blocker does.
Single Ring Issue On Blocked Calls
Problem with a single ring If you are having a single ring issue with blocked calls, the CPR Call Blocker uses the ‘first ring’ to get the Caller ID signal and then checks this against the block list to see if the number has been blocked – it is ...