NEW V10,000 + V5000 Quick Programming Codes

NEW V10,000 + V5000 Quick Programming Codes


V10,000 Quick Programming Codes


Change Mode:

1. Get a dial tone


2. Hold CALL LIST for 5 seconds until the call blocker beeps this will change the call blocker to mode “100”


3. Hang up and repeat the process for mode “200” and “300”


Turn ON Blocking International calls:

1. Get a dial tone


2. Press * on the telephone keypad and then quickly press the BLOCK LIST button on the Call Blocker



Turn OFF Blocking International calls:

1. Get a dial tone


2. Press * on the telephone keypad and then quickly press the ALLOW LIST button on the Call Blocker



Turn ON Blocking Unavailable / Unknown calls:

1. Get a dial tone


2. Press # on the telephone keypad and then quickly press the BLOCK LIST button on the Call Blocker



Turn OFF Blocking Unavailable / Unknown calls:

1. Get a dial tone


2. Press # on the telephone keypad and then quickly press the ALLOW LIST button on the Call Blocker

 

Turn ON Blocking Private calls:


1. Get a dial tone


2. Press 7* on the telephone keypad and then quickly press the BLOCK LIST button on the Call Blocker


Turn OFF Blocking International calls:


1. Get a dial tone


2. Press 7* on the telephone keypad and then quickly press the ALLOW LIST button on the Call Blocker


Turn ON Blocking VOIP calls:

  1. Get a dial tone.
  2. Dial 6* then quickly press BLOCK LIST on the call blocker.

Turn OFF Blocking VOIP calls:

  1. Get a dial tone.
  2. Dial 6* then quickly press ALLOW LIST on the call blocker.

V5,000 Quick Programming Codes


Change Mode:


1. Get a dial tone


2. Hold DELETE for 5 seconds until the call blocker beeps this will change the call blocker to mode “100”


3. Hang up and repeat the process for mode “200” and “300”


 






    • Related Articles

    • Programming issues

      If any U.S customers experience programming issues with their Call Blockers, such as an early busy tone or not working after entering the code can you please try the following workaround methods before returning the product to wherever you purchased ...

    • CPR Call Blocker Protect+ Programming Codes

      IMPORTANT - WHEN PROGRAMMING THE CALL BLOCKER PROTECT + YOU WILL ALWAYS HEAR THE BT OPERATOR SAYING YOUR CALL CANNOT BE COMPLETED AS DIALLED. THIS IS NORMAL WITH THE PROTECT + AS THE LINE IS LEFT OPEN FOR MANUAL PROGRAMMING OUR END IF NEEDED. SIMPLY ...

    • Why am I getting a busy signal when trying to enter the programming codes?

      The programming codes will only be accepted when in the standard set up with the small black cable, please ensure you are in this set up before proceeding to enter codes. Some telephone line providers use network codes that may conflict with the Call ...

    • How can I change my password?

    • ABOUT CPR Call Blocker v.2000

      This is the CPR Call Blocker v.2000 model. This unit is exactly the same as the previous v.202 model, but it has updated pre-programmed numbers stored in the call blocker totalling a whopping 2000 number capacity altogether. You can also block up to ...