Error message on screen

Problem

If the Call Blocker screen is showing ‘ERROR’ – the most common cause for this is when there has been an interruption to the signal on the CPR Call Blocker.

With the Call Blocker reading all signals sent down the line, if it has not been able to read a signal (e.g. telephone line updates) it will place itself into an error state.

Solution

Disconnect the call blocker from the line for a minimum of 60 minutes and then reconnect, this will clear the issue.

• Related Articles

• CPR Call Blocker APP for Android

    Adding Contacts to the Blocklist ✎   Upon starting the app your blocklist will be blank by default. There are a variety of ways to add a number to the blocklist,  accessible via the ‘+ ADD‘ button above the  ‘ Blocklist‘ tab icon. You can choose ...

• ABOUT the CPR Call Blocker Protect+

  This is the CPR Call Blocker Protect + model.  This Call Blocker has been designed by us at CPR specifically for the elderly or very vulnerable. These Call Blockers are designed to BLOCK EVERY call that comes through to a customer's line, unless they ...

• V5000 blocker showing Unavailable for customers with a Virgin Media line

  If you have a V5000 and get unavailable on the display screen this is what you do to resolve the issue. As I have found that Mode 100 seems to fixing the issues. Firstly insert the line cable into Line and the short black cable into Tel Lift the ...

• V10000 - How to reset the call blocker

  To reset the Call Blocker back to factory settings – this will erase all numbers in the block list and allow list. First ensure that the call blocker is set up in the standard set up, using the small black cable that was provided. Solutions: There is ...

• V5000 - How to reset the call blocker

  To reset the Call Blocker back to factory settings – this will erase all numbers in the block list. First ensure that the call blocker is set up in the standard set up, using the small black cable that was provided. Solutions: To reset the Call ...