Correct way to set up The CPR Call Blocker with VOIP Cable Router connections

If your phone line connection comes from a Cable VOIP Router such as Ooma, Comcast, Century TEL/Link, Cox, 
AT&T, Verizon FIOS, Magic Jack, etc...


IN-LINE (SERIES)



IN-PARALLEL (via splitter and additional line cable supplied)

Only use this connection if you are unfortunate enough to lose caller ID on your line when the call blocker is attached.

• Related Articles

• CPR Call Blocker APP for Android

    Adding Contacts to the Blocklist ✎   Upon starting the app your blocklist will be blank by default. There are a variety of ways to add a number to the blocklist,  accessible via the ‘+ ADD‘ button above the  ‘ Blocklist‘ tab icon. You can choose ...

• ABOUT the CPR Call Blocker Protect+

  This is the CPR Call Blocker Protect + model.  This Call Blocker has been designed by us at CPR specifically for the elderly or very vulnerable. These Call Blockers are designed to BLOCK EVERY call that comes through to a customer's line, unless they ...

• How do I set up the Call Blocker IN PARALLEL correctly?

  In some instances, you may need to set up your unit IN-PARALLEL if you are unfortunate enough to lose caller ID on your phones/call blocker when the call blocker is attached. This method doesn't take as much power from your line like the standard ...

• How do I set up the v108 Call Blocker?

  The correct method to set it up is IN-LINE as illustrated below.  The main line cable from the main socket to your phone simply unplugs from your phone and plugs into the LINE 2 port of the Call Blocker (left side).  The short black cable we supply ...

• V10000 - How to reset the call blocker

  To reset the Call Blocker back to factory settings – this will erase all numbers in the block list and allow list. First ensure that the call blocker is set up in the standard set up, using the small black cable that was provided. Solutions: There is ...