Can I program call blocker to block specific numbers, area codes and spoofed exchange numbers?

Can I program call blocker to block specific numbers, area codes and spoofed exchange numbers?

Yes. for example if you wish to block all 602 area codes simply get a dial tone and enter **7#602#

Spoofed Exchanges [555] like in the number: 602-555-1234, which is the second set of 3 digit numbers after the area code of 602 in this example, can be blocked by entering **7#555# . Other number sets can be blocked as well besides 555, like 000, 111, 222, 333, etc.




    • Related Articles

    • CPR Call Blocker APP for Android

        Adding Contacts to the Blocklist ✎   Upon starting the app your blocklist will be blank by default. There are a variety of ways to add a number to the blocklist,  accessible via the ‘+ ADD‘ button above the  ‘ Blocklist‘ tab icon. You can choose ...
    • ABOUT the CPR Call Blocker Protect+

      This is the CPR Call Blocker Protect + model.  This Call Blocker has been designed by us at CPR specifically for the elderly or very vulnerable. These Call Blockers are designed to BLOCK EVERY call that comes through to a customer's line, unless they ...
    • V10000 - How to reset the call blocker

      To reset the Call Blocker back to factory settings – this will erase all numbers in the block list and allow list. First ensure that the call blocker is set up in the standard set up, using the small black cable that was provided. Solutions: There is ...
    • V5000 - How to reset the call blocker

      To reset the Call Blocker back to factory settings – this will erase all numbers in the block list. First ensure that the call blocker is set up in the standard set up, using the small black cable that was provided. Solutions: To reset the Call ...
    • CPR Call Blocker Protect+ Programming Codes

      IMPORTANT - WHEN PROGRAMMING THE CALL BLOCKER PROTECT + YOU WILL ALWAYS HEAR THE BT OPERATOR SAYING YOUR CALL CANNOT BE COMPLETED AS DIALLED. THIS IS NORMAL WITH THE PROTECT + AS THE LINE IS LEFT OPEN FOR MANUAL PROGRAMMING OUR END IF NEEDED. SIMPLY ...