Caller ID is not displaying on the call blocker screen but my phones show caller ID; What is the problem?
You may have accidentally placed the Call Blocker into Foreign Caller ID mode (DTMF) instead of the default FSK mode. The Call Blocker has three different Caller ID modes try all three to see which one works. Get a dial tone and enter:
**9#100#
Check to see if caller ID returns, if not try the following:
**9#200#
Check to see if caller ID returns, if not try the following:
**9#300#
Related Articles
Caller ID stopped working when using Call Blocker
In the U.S.A especially, due to the large areas involved, sometimes the caller ID signal can differ in strength depending on how far your home is from the telephone exchange and appear weaker and as a result, you may lose the caller ID feature on ...
CPR Call Blocker APP for Android
Adding Contacts to the Blocklist ✎ Upon starting the app your blocklist will be blank by default. There are a variety of ways to add a number to the blocklist, accessible via the ‘+ ADD‘ button above the ‘ Blocklist‘ tab icon. You can choose ...
V10000 Most Frequent Questions - February 2019
These are the most frequent questions in February, we have provided different solutions to resolve. Call list or block list button not functioning Solution Options: Ensure line is not overloaded with too much telephony equipment (multiple separate ...
V5000 Most frequent questions - February 2019
Most frequent questions in February, we have provided several different solutions to resolve. Caller ID not showing on the call blocker, dashes showing across the middle of the screen instead Solution Options: Ensure the call blocker is set up on ...
Do CPR Call Blockers repeat caller ID information to the telephones connected to the tel port?
Yes, the Caller ID is captured and repeated to all phones downlinked to the TEL port. If you have a corded phone or cordless phone system base connected there, then all corded phones and cordless handsets to that base will receive the repeated Caller ...